Home     News       Full-automatic multi-station bag packagi…


Full-automatic multi-station bag packaging machine for nuts

The full-automatic multi-station bag packaging machine for nuts has replaced manual packaging, realized packaging automation for large enterprises and small and medium-sized enterprises, and improved the production efficiency of all walks of life. The packaging machine plastic bag is equipped with a standard detection device, which can detect that the filling device does not fill when there is no packaging or the packaging bag is not opened, and the heat sealing device does not seal, thus avoiding the waste of packaging materials and raw materials.

Main features:
1. It can intelligently detect whether the bag is opened and whether the bag is complete. It can be
Users can save considerable costs.
2. The working speed of the potato paper bags packaging machine can be adjusted freely and steplessly by the variable frequency speed control device within the specified range.
3. Equipped with advanced German Siemens PLC control, the touch screen man-machine interface is more convenient to operate.
4. Overload protection, safety device. Automatic alarm prompt in case of abnormal working pressure of the machine or heating pipe failure.
5. It can realize double feeding, solid-liquid addition and different liquid addition.
6. The width of each group of clips can be controlled and adjusted by the motor, which is applicable to bags with different widths.
7. Some components are equipped with imported tolerance plastic bearings, which do not need to be oiled to reduce food pollution.
8. The parts in contact with packaging bags or materials in the whole water bags packaging machine are made of stainless steel and other materials that meet the requirements of food processing, and meet the requirements of food processing
Industrial hygiene standards, safe and reliable.
9. Different measuring devices can be selected to weigh the materials, and the packaging range is wide, which can be applied to liquid, paste, particle, powder
Packaging of regular blocks and other materials.
10. Prefabricated product packaging bags with patterns * are used, with good sealing effect and high grade of finished products.
11. It can pack prefabricated bags and paper bags made of multi-layer composite film, single-layer PE, PP and other materials, with a wide range of packaging.
Equipment process flow:
1. Bag feeding station: put the prefabricated bag on the bag bin, and the bag can move up and down. When the bag falls, use the suction cup to take the bag
When lifting, use the two suction cups of the manipulator to transfer the bag to the mechanical gripper of the rotary table.
2. Coding station: production date and production batch number can be printed.
3. Zipper opening station: use four suction cups at the upper and lower parts of the bag to open the bag.
4. Bag opening station: automatic suction cup vacuum bag opening
5. Metering and filling station: there is a detection device to detect whether the bag is called, and the material will not be discharged until it is opened. On the contrary, the material will be discharged when the bag mouth is opened.
6. Initial heat sealing station: for the heat sealing of the bag mouth, the hot air bar can be selected as mesh or straight.
7. Secondary heat sealing station: to make the sealing more flat and higher.
8. Cooling and shaping station: cooling, shaping and finished product output

Copyright © 2013-2022 ZHEJIANG JOYGOAL Machinery Co., Ltd. All Rights Reserved.